Flat wall convectors represent a universal product not only for combining with OnFloor and InFloor convectors but also as the only heater in the space. Flat convectors suit the requirements of small size, maximum output and neat design. The concept of each type is based on a similar design to the outer trench with an integrated grille as on the OnFloor convectors which have a power laminated heat exchanger. The convection part and radiant part of the heat source support the air circulation even in big areas. The basic colour designs allow the convectors to blend with the surroundings whereas optional colour designs serve to emphasize them. Unassuming and aesthetic in design, the basic requirements for installation in private and public spaces, in standard sized rooms and large areas are thus easily met.
Flat Convector standard size:
Classic and Basic:
- heights 140, 240, 280, 350, 500 and 600 mm,
- widths 80, 130, 180, 230 mm,
- lengths from 600 to 2000 mm.
Standard Flat package includes:
- unpainted laminated Cu/Al heat exchanger with low water content, ending with 2 bushings with G1/2 '' with an inner thread ,
- cover with longitudinal duralumin (OnFloor Classic) or a die-cast steel grille (Basic OnFloor),
- trench and fittings lacquered in white RAL 9016,
- possible mounting on a rough floor or wall,
- automatic air vent,
- bench board supports,
- bench board made out of beech – matt lacquer.
Optional extras include:
- regulating components on the water side – thermostatic valve and closable and regulating fittings,
- thermostatic head,
- lacquer on the trench and other components in different colour than white,
- lacquered exchanger.
Flat convector order code:
| Type | Height | Length | Width | Colour | ||||
|---|---|---|---|---|---|---|---|---|
| WKE – Flat Classic for a wall | - | 14 = 140 mm | - | 040 = 400 mm | - | 08 = 80 mm | - | 04 = RAL 9016 |
| WBE – Flat Basic for a wall | 24 = 240 mm | : | 13 = 130 mm | 03 = Grey metallic | ||||
| 28 = 280 mm | : | 18 = 180 mm | ||||||
| 35 = 350 mm | : | 23 = 230 mm | ||||||
| 50 = 500 mm | : | |||||||
| 65 = 650 mm | 200 = 2000 mm |
Example:
Convector Flat Classic, type WKE for a wall, height 240 mm, length 1800 mm, width 130 mm, colour RAL 9016
| WKE | - | 24 | - | 180 | - | 13 | - | 04 |
Order code: WKE-24-180-13-04 Left connection: ordering code: WKE-24L180-13-04
